Manual screeding system TAS-UNI
By: Date: July 29, 2020 Categories: Screeding systems Tags:




Universally suitable for precise and flexible screeding of laying courses on both, large and small sites. Comfortable upright working position. Consisting of the following components:Telescopic aluminium screeding profiles, height adjustable roller units on either side, pulling elements. The aluminium profile has been optimized. So the device does neither move upwards when pulled by hand nor when pulled with chains mechanically. In one run a clean and exact screed can be produced. The profile was increased in order to be able to move more material when the predistribution of the screeding material is very rough. Step above the roller unit on which the operator can stand to increase the pressure to the ground when using the TAS-M mechanically.

Leave a Reply

Your email address will not be published. Required fields are marked *